WOD Double-Sided PVC Mounting Tape — 3/4" x 36 yds (5.5 mil, Clear)

When you want a strong, clean bond without screws or liquid glue, this double-sided PVC tape delivers. It features a white PVC film carrier coated on both sides with a high-tack acrylic adhesive, giving fast grab and dependable holding power across many common materials. The 5.5 mil thickness offers a consistent feel and a neat, hidden finish—perfect for professional installs and DIY projects alike.

Key Features & Benefits

• High-tack acrylic adhesive for fast, reliable bonding

• Double-sided white PVC film for a clean, professional look

• 5.5 mil total thickness for consistent spacing and strength

• 36 yards per roll — great coverage for multiple projects

• Good resistance to UV, aging, and moisture vapor

• Siliconized paper release liner for easy handling and precise placement

• No mess, no cure time — mount immediately after application

Common Uses

• Mounting acoustic foam panels and lightweight treatments

• Attaching fabric to frames, trims, or backing boards

• Signs & graphics installation

• General shop assembly where a hidden bond is preferred

How to Apply (Best Results)

1. Prep the surfaces
   Make sure both surfaces are clean, dry, and dust-free. Wipe with isopropyl alcohol if needed and allow to dry.

2. Apply tape to one surface
   Press the tape firmly along the mounting area, applying even pressure to activate the adhesive.

3. Remove the liner
   Peel back the siliconized paper liner carefully without touching the exposed adhesive.

4. Mount and press
   Align carefully, then press the second surface into place with firm, uniform pressure across the entire bond area.

5. Set time
   Initial grab is immediate. For maximum bond strength, allow 24 hours before applying heavy load or stress.

Pro Tips

• Apply at room temperature for best adhesion.

• For porous materials (like some foams or fabrics), use full coverage rather than strips.

• Once bonded, repositioning may damage materials—dry-fit first.